Description
|
 |
Versatility combined with portability.
Matheson's Flowmeter Kit is a user friendly kit designed to fill
your requirements for wide flow ranges of many different gases. The
kit contains a flowmeter frame, four 150mm scaled TUBE CUBES™, three
valves and a flowmeter stand along with tools for changing the tubes
and valves. This allows you to measure ranges from 4 ccm to 50 lpm.
We provide calibration curves for air. Other gases available upon
request. |
| Design Features |
- Convenient, easy to
use flow measurement
- Brass construction
for non-corrosive gases (FM-3000)
- Aluminum
construction for mildly corrosive gases (FM-2000)
- Stainless steel
construction for corrosive gases (FM-4000)
- Measure a wide range
of flow rates with a single unit
- TUBE CUBE unitized
glass tube holding device
- High resolution
150mm scale
- Precision tapered,
fluted metering tubes
- Maximum flow rates
ensured by low pressure drop
- Superior readability
is ensured by a reflective, high contrast background and 1.5 X
magnification lens
- Easy installation,
quick service access
- Safety blow-out back
panel
- Portability ---
compact, impact resistant carrying case
| Specifications
| Pressure Rating: |
250 psig maximum operating
pressure |
| Temperature Rating: |
-20ºF to 165ºF |
| Accuracy: |
±5% full scale flow rate |
| Repeatability: |
±0.25% of scale reading |
| Flow Range: |
10 to 1 or greater, i.e., 100% to 10% of full
scale |
| Scale: |
0 to 150mm |
| Calibration Curves: |
Required to determine flow rate of the
media |
Materials of
Construction
| Wetted End Blocks, Fittings and Internal
Parts: |
Anodized aluminum, brass or 316 stainless
steel |
| Non-Wetted Side Plates: |
Painted or anodized
aluminum |
| Metering Tube: |
Borosilicate glass enclosed in the patented
TUBE CUBE holder |
| Scale: |
Ceramic fused on the glass flow tube 0 to
150mm |
| Inlet and Outlet Connections: |
1/4" compression tube fittings of either
brass construction for aluminum and brass kits or stainless steel
construction for 316 stainless steel kits |
| Wrenches: |
5/32" allen wrench for TUBE CUBE assembly and
1/2"-9/16" open end wrench for valve
assembly | |